martes, 6 de septiembre de 2016

Cisco 890

Cisco® 890 Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as customer premises equipment (CPE) in enterprise small branch offices and in service provider managed-service environments.
Product Overview
Cisco 890 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband, Metro Ethernet, and wireless LAN (WLAN) connectivity. Service providers offering managed Ethernet WAN services can deploy them in customer locations as CPE. You get centralized and remote management capabilities through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.
The 890 routers simplify the deployment of Ethernet WAN services, with end-to-end operations, administration, and maintenance (OA&M), service-level agreement (SLA) monitoring and verification, and configuration management.
Cisco 890 Series ISRs come with an 8-port managed switch, providing LAN ports to connect multiple devices. An optional Power-over-Ethernet (PoE) capability can also supply power to IP phones and other devices. Eleven Cisco 890 Series models are available: Figure 1 shows the front and back of one, the Cisco 892FSP.
Figure 1.      Cisco 892FSP ISR, Front and Back
Features and Benefits
Table 1 describes some of the business needs enterprises have in branch offices and other edge networking locations and how the 890 ISR fulfills those requirements.
Table 1.       How the 890 ISR Addresses Edge Networking Challenges
Business Need
890 ISR Feature(s)/Description
High availability and business continuity
  Redundant WAN connections for failover protection and load balancing
  Dynamic failover protocols such as Virtual Router Redundancy Protocol (VRRP; RFC 2338), Hot Standby Router Protocol (HSRP), and Multigroup HSRP (MHSRP)
  Dial backup with external modem through a virtual auxiliary port
Consistent, high application performance levels
  The router can run multiple services simultaneously with no performance degradation
Risk mitigation with multilevel security
  Network perimeter security with integrated application inspection firewall
  Data privacy through high-speed IP Security (IPsec) Triple Data Encryption Standard (3DES) and Advanced Encryption Standard (AES) encryption
  Enforced security policy with intrusion prevention
  Security hardware acceleration
  FlexVPN
  Next-generation encryption for secure network communications systems, reliable for the next decade
  Cisco ISR Web Security with Cisco ScanSafe, designed to prevent zero-day malware from reaching corporate networks
Feature consolidation for real estate, capital expenditures (CapEx), and management savings
  Supports LAN connections, both Ethernet and Wi-Fi, in one appliance. Contains an integrated 802.11n WLAN access point that supports both autonomous and unified modes, as well as an 8-port LAN switch. Management of both the wired and wireless environments is integrated
Unified control of wired and wireless networks from a common console for streamlined operations
  Simplifies and centralizes configuration and management of wireless and wireline devices. Supports WLAN services without requiring a wireless LAN controller
Remote configuration and management to keep local IT staff lean
  Supports separate console, auxiliary, and USB ports
  Provides one USB 2.0 flash memory
Platform Support
Table 2 describes the interfaces, Wi-Fi options, and integrated capabilities supported by each of the Cisco 890 Series ISR models.
Table 2.       Platform Support for 890 Series ISRs
Model
WAN Interfaces
LAN Interfaces
802.11a/g/n Option
Integrated USB 2.0/AUX/Console
Integrated Dial Backup
Cisco 892FSP
1-port GE or 1‑port SFP
1-port GE
8-port 10-/100-/1000-Mbps managed switch
No
Yes
No
Cisco 896VA
1-port GE or 1‑port SFP
VDSL/ADSL2+ Annex B
8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)
No
Yes
ISDN
Cisco 897VA
1-port GE or 1‑port SFP
VDSL/ADSL2+ Annex A/M
8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)
Yes
Cisco CleanAir®technology
Yes
ISDN (only on Cisco 897VA-K9)
Cisco 897VAB
1-port GE or 1‑port SFP
VDSL/ADSL2+ Annex A with Bonding
8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)
No
Yes
No
Cisco 898EA
1-port GE or 1‑port SFP
4 pair Ethernet in the first mile (EFM)
8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)
No
Yes
No
Cisco 891F
1-port GE or 1‑port SFP
1-port FE
8-port 10-/100-/1000-Mbps managed switch (4‑ports PoE capable with 125W power supply adapter)
Yes
Cisco CleanAir technology
Yes
V.92 analog modem
ISDN BRI
Cisco 891-24X
2-port GE or 2‑port SFP
24-port 10-/100-/1000-Mbps managed switch (8-ports PoE capable with integrated power supply)
No
Yes
No
Product Specifications
Table 3 shows Cisco IOS Software features, WLAN features, and general system specifications for the 890 Series ISRs.
Table 3.       890 Series IOS Software Features, WLAN Features, and System Specifications
Feature
Specification

Cisco IOS Software: Advanced IP Features Set (Default)
IP and IP services
  Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
  Generic routing encapsulation (GRE) and multipoint GRE (MGRE)
  Cisco Express Forwarding
  Standard 802.1d Spanning Tree Protocol
  Layer 2 Tunneling Protocol (L2TP)
  Layer 2 Tunneling Protocol Version 3 (L2TPv3)
  Network Address Translation (NAT)
  Dynamic Host Configuration Protocol (DHCP) server, relay, and client
  Dynamic Domain Name System (DNS)
  DNS Proxy
  DNS Spoofing
  Access control lists (ACLs)
  IPv4 and IPv6 Multicast
  Open Shortest Path First (OSPF)
  Border Gateway Protocol (BGP)
  Performance Routing (PfR)
  Enhanced Interior Gateway Routing Protocol (EIGRP)
  Virtual Route Forwarding (VRF) Lite
  Next Hop Resolution Protocol (NHRP)
  Bidirectional Forwarding Detection (BFD)
  Web Cache Communication Protocol (WCCP)

xDSL
  True Multimode VDSL2 and ADSL2+ over Annex A, B, J, and M including traditional G.DMT and T1.413
  World-class interoperability with industry-standard DSL access multiplexer (DSLAM) chipsets
  Highest field reliability with Impulse Noise Protection over REIN/SHINE, Extended INP-Delay, G.INP, Physical Layer Retransmission, SRA, and Bitswap
  VDSL2 Persistent Storage Device (PSD) profiles up to 17a/b with support for Spectral Shaping
  VDSL2 Vectoring to offer blazing fiber speeds over copper
  Support for 4-pair multimode G.SHDSL; that is, ATM and EFM
  Remote management with TR069 and CWMP
  Investment protection with GE and SFP for future fiber that could replace xDSL deployment

Switch features
  Auto Media Device In/Media Device Cross Over (MDI-MDX)
  14 802.1QVLANs
  MAC filtering
  Four-port 802.3af and Cisco compliant PoE
  Switched Port Analyzer (SPAN)
  Storm Control
  Smart ports
  Secure MAC address
  Internet Group Management Protocol Version 3 (IGMPv3) snooping
  802.1x

Security features
Secure connectivity:
  Secure Sockets Layer (SSL) VPN for secure remote access
  Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
  Public-key-infrastructure (PKI) support
  Fifty IPsec tunnels
  Cisco Easy VPN Client and Server
  NAT transparency
  Dynamic Multipoint VPN (DMVPN)
  Tunnel-less Group Encrypted Transport VPN
  VRF-aware IPsec
  IPsec over IPv6
  Adaptive control technology
  Session Initiation Protocol (SIP) application-layer gateway
  Cisco IOS Firewall:
   Zone-Based Policy Firewall
   VRF-aware stateful inspection routing firewall
   Stateful inspection transparent firewall
  Advanced application inspection and control
  Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy
  Dynamic and static port security
  Firewall stateful failover
  VRF-aware firewall
  Cisco ScanSafe Connector
  Cisco IOS Software black and white lists
  Integrated threat control:
   Intrusion Prevention System (IPS)
  Control Plane Policing
  Flexible Packet Matching
  Network foundation protection

Quality of Service (QoS)
  Low-Latency Queuing (LLQ)
  Weighted Fair Queuing (WFQ)
  Class-Based WFQ (CBWFQ)
  Class-Based Traffic Shaping (CBTS)
  Class-Based Traffic Policing (CBTP)
  Policy-Based Routing (PBR)
  Class-Based QoS MIB
  Class of service (CoS)-to-differentiated services code point (DSCP) mapping
  Class-Based Weighted Random Early Detection (CBWRED)
  Network-Based Application Recognition (NBAR)
  Link fragmentation and interleaving (LFI)
  Resource Reservation Protocol (RSVP)
  Real-Time Transport Protocol (RTP) header compression (cRTP)
  Differentiated Services (DiffServ)
  QoS preclassify and prefragmentation
  Hierarchical QoS (HQoS)

Management
  Cisco Configuration Professional
  Cisco Configuration Express
  Cisco Configuration Engine support
  Cisco AutoInstall
  Cisco IP Service-Level Agreement (IP SLA)
  Cisco IOS Embedded Event Manager (EEM)
  CiscoWorks
  Cisco Security Manager
  Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, command-line interface (CLI), and HTTP management
  RADIUS and TACACS+
  Out-of-band management with ISDN S/T port or external modem through a virtual auxiliary port on models supporting those interfaces; refer to Table 2 for details
  Cisco Wireless Control System (WCS) for management of unified access points in models supporting WLAN; on models supporting WLAN, refer to Table 2 for details

High availability
  Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
  HSRP
  MHSRP
  Dial backup with external modem through virtual auxiliary port
  Dial backup with ISDN S/T or V.92 Analog modem port

Metro Ethernet
  Ethernet OA&M
  Ethernet Local Management Interface (E-LMI)
  IP SLA for Ethernet

IPv6
  IPv6 addressing architecture
  IPv6 name resolution
  IPv6 statistics
  IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation)
  Internet Control Message Protocol Version 6 (ICMPv6)
  IPv6 DHCP
  OSPFv3
  BGP4+
  IPv6 path maximum transmission unit (PMTU)
  IPv6 Neighbor Discovery
  IPv6 stateless address autoconfiguration (SLAAC)
  IPv6 Multicast Routing

Unified WLAN management
  Unified access-point features:
        Supported by wireless LAN controller and Cisco WCS
  Configurable local or central switching for Hybrid Remote Edge Access Point (HREAP) mode
  Radio management through Cisco WCS
  Transparent roaming with mobility groups

Application visibility and control
  Cisco Wide Area Application Services (WAASx)
  NBAR2
  Flexible NetFlow (FNF)
  Performance Agent

Number of recommended users
50

WLAN Features (Available with Wireless Option)

Standard 802.11 a/g/n access point
  Optional on Cisco 890 Series models

WLAN hardware
  Support for Cisco CleanAir technology on Cisco 897 and 891F
  Automatic rate selection for 802.11a/g/n
  Noncaptive RPTNC omnidirectional dipole antennae; 2-dBi gain @ 2.4 GHz, 5-dBi gain @ 5 GHz
  2 x 3 multiple input, multiple output (MIMO) radio operation
  Wi-Fi 802.11n Draft v2.0 certified

WLAN software features
  Autonomous or unified access point
  Cisco WCS support for monitoring of autonomous-mode access points
  Option to maximize throughput or maximize range
  Software-configurable transmit power
  Radio roles, including access point, root bridge, nonroot bridge, and workgroup bridge
  Wi-Fi Multimedia (WMM) certification
  Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is maintained
  Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency

WLAN security features
  Standard 802.11i
  Wi-Fi Protected Access (WPA) and AES (WPA2)
  EAP authentication: Cisco Light Extensible Authentication Protocol (LEAP), Protected Extensible Authentication Protocol (PEAP), Extensible Authentication Protocol Transport Layer Security (EAP TLS), Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST), Extensible Authentication Protocol-Subscriber Information Module (EAP-SIM), Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5), and Extensible Authentication Protocol‑Tunneled TLS (EAP-TTLS)
  Static and dynamic Wired Equivalent Privacy (WEP)
  Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption
  MAC authentication and filter
  User database for survivable local authentication using LEAP and EAP-FAST
  Configurable limit to the number of wireless clients
  Configurable RADIUS accounting for wireless clients
  Preshared keys (PSKs) (WPA-small office or home office [WPA-SOHO])

Certifications
Note: Due to new FCC WiFi June 2016 regulation (FCC rules for part 15.409), the WLAN radio used in the ISR's (specifically C819 –A WiFi Domain with AP802 dual 802.11 radio) Cisco will be issuing a new grant for the 5GHz dual 802.11n radio.

The specific reason for the change is due to the inability of the radio to detect the various radar pulses (DFS function) over the entire bandwidth of the channels in the 5250-5350 and the 5500-5700 A radio channel bands (which will be disabled). As a consequence the radio will now operate from 5150-5250 and 5745-5850 A radio bands. This will provide a total of nine channels in the 5GHz range.


Service Set Identifiers (SSIDs) and Multiple Broadcast SSIDs
  16

Wireless VLANs
  14 (encrypted and nonencrypted VLANs)

Default and maximum DRAM
  Default 512MB
  Up to 1 GB on Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F, and 891-24X data models; upgrade option available

Default and maximum flash memory
  256 on all Cisco 890 ISR models; not upgradable

WAN
  Refer to Table 2 for details

LAN switch
  Refer to Table 2 for details

Separate console and auxiliary ports
  RJ-45

USB 2.0
  One USB 2.0 port available on Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F, and 891-24X
  USB devices supported:
   USB flash memory
Note: USB 2.0 ports cannot be used for connecting external devices other than those specified at:http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html.

ISDN BRI S/T
  Refer to Table 2 for details

Inline PoE
  Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af-compliant and Cisco PoE-compliant
  No PoE support on Cisco 892FSP

Wireless specifications
  2.4 and 5 GHz

Data rates supported
  802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
  802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
  802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
  802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and m0-m15

Maximum transmit power (2‑channel aggregate)
  802.11a: 15dBm
  802.11b: 20 dBm
  802.11g: 17 dBm
  802.11n: 16 dBm
Note: Maximum power setting is subject to change by channel and by region, depending on regulations.

Physical dimensions and weight
Weight: 5.5 lb (2.5 kg) maximum
Product dimensions:
  Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, and 891F:
   H x W x D =1.82 x 12.71 x 9.78 in. (4.62 x 32.28 x 24.84 cm) (includes rubber feet)
   H x W x D = 1.75 x 12.71 x 9.78 in. (4.45 x 32.28 x 24.84 cm) (without rubber feet)
  Cisco 891-24X:
   H x W x D = 1.75 x 17.25 x 12 in. (4.62 x 43.81 x 30.48 cm) (includes rubber feet)
   H x W x D = 1.75 x 17.25 x 12 in. (4.45 x 43.81 x 30.48 cm) (without rubber feet)

External power supply
Product power specifications:
  AC input voltage: Universal 100 to 240 VAC
  Frequency: 50 to 60 Hz
  Maximum output power: 60W
  Output voltages: 12 VDC
  Optional PoE:
   Separate 80W PoE power supply for Cisco 891 and 892 ISRs
   Single 125W power supply required for Cisco 896, 897, 898, and 891F for router and PoE
   The Cisco 891-24X uses the internal power supply for PoE
  External output voltage: 48 VDC

Approvals and compliance
  Emission
  47 CFR Part 15: 2006
   CISPR22: 2005
   EN300386: V1.3.3: 2005
   EN55022: 2006
   EN61000-3-2: 2000 [Inc amd 1 & 2]
   EN61000-3-3: 1995 [+ amd 1: 2001]
   ICES-003 Issue 4: 2004
   KN 22: 2005
   VCCI: V-3/2006.04
  Immunity
  CISPR24: 1997 [+ amd 1 & 2]
   EN300386: V1.3.3: 2005
   EN50082-1: 1992
   EN50082-1: 1997
   EN55024: 1998 [+ amd 1 & 2]
   EN61000-6-1: 2001

Environmental operating range
  Nonoperating temperature: -4 to 149°F (-0 to 65°C)
  Nonoperating humidity: 5 to 95% relative humidity (noncondensing)
  Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
  Operating temperature: 32 to 104°F (0 to 40°C)
  Operating humidity: 10 to 85% relative humidity (noncondensing)
  Operating altitude: 0 to 10,000 ft (0 to 3000m)

Ordering Information
Table 4 lists the part numbers and Cisco IOS Software and WLAN software image details for each of the 890 Series ISR models. To place an order, visit the Cisco Ordering Home Page. To download software, visit the Cisco Software Center.
Table 4.       Product Part Numbers and Software Images
Product Part Number
Product Description
Integrated Services Routers
C892FSP-K9
Cisco 892FSP Gigabit Ethernet security router with SFP
C896VA-K9
Cisco 896VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex B
C897VA-K9
Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A
C897VAW-A-K9
Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A with Wireless
C897VAW-E-K9
Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex A with Wireless
C897VA-M-K9
Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex M
C897VAM-W-E-K9
Cisco 897VA Gigabit Ethernet security router with SFP and VDSL/ADSL2+ Annex M with Wireless
C897VAB-K9
Cisco 897VA Gigabit Ethernet security router with SFP and VDSL2/ADSL2+ Bonding over POTS
C898EA-K9
Cisco 898EA Gigabit Ethernet security router with SFP and 4 channel multimode G.SHDSL (EFM/ATM)
C891F-K9
Cisco 891F Gigabit Ethernet security router with SFP
C891-24X/K9
Cisco 891 Gigabit Ethernet security router with SFP and 24-ports Ethernet Switch
C891FW-A-K9
Cisco 891F Gigabit Ethernet security router with SFP and Dual Radio 802.11n Wifi for FCC -A domain
C891FW-E-K9
Cisco 891F Gigabit Ethernet security router with SFP and Dual Radio 802.11n Wifi for ETSI -E domain
Cisco 892FSP is supported only on Cisco IOS Software Release 15.2(4)M and later
Cisco 896, 897, 898EA is supported only on Cisco IOS Software Release 15.2(4)M1 and later
Cisco 891F is supported only on Cisco IOS Software Release 15.3(3)M2, 15.4(1)T and later
C897VAB is supported only on Cisco IOS Software Release 15.4(3)M1 and later
C891-24X is supported only on Cisco IOS Software Release 15.5(1)T and later
Memory Options
FL-8XX-512U1GB
512 MB DRAM upgrade to 1 GB for Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F model (Feature License)
Router Software Images
Image
C800-universalk9-mz: Universal image for Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F, 891-24X
Access Point Software Images
ap802-k9w7-tar
Autonomous software image for ap802
ap802-rcvk9w8-tar
Lightweight Access Point Protocol (LWAPP) recovery image for ap802
Power over Ethernet Options
800-IL-PM-4 with 125W PSU
4-port 802.3af capable internal power module for C896, C897, C898, C891F routers
Security Services
Scan SafeCloud Web Security
ScanSafe Connector
Supported SFP Types on the Cisco 892F Series and Cisco 892FSP, 896VA, 897VA, 897VAB, 898EA, 891F
GLC-LH-SM
1000BASE-LX/LHSFP transceiver module for MMF and SMF, 1300-nm wavelength, dual LC/PC connector
GLC-SX-MM
1000BASE-SXSFP transceiver module for MMF, 850-nm wavelength, dual LC/PC connector
GLC-ZX-SM
1000BASE-ZXSFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector
GLC-BX-D
1000BASE-BX10SFP module for single-strand SMF, 1490-nm TX/1310-nm RX wavelength, single LC/PC connector
GLC-BX-U
1000BASE-BX10SFP module for single-strand SMF, 1310-nm TX/1490-nm RX wavelength, single LC/PC connector
GLC-T
1000BASE-T standard
GLC-GE-100FX
Cisco 100BASE-FX SFP for Gigabit Ethernet SFP ports with multimode fiber-optic (MMF) link
GLC-FE-100LX
Cisco 100BASE-LX10SFP with single-mode fiber-optic (SMF) link
GLC-FE-100BX-U
100BASE-BX10-U SFP module for 100-MB ports, 1310 nm TX/1550 nm RX wavelength, 10 km over single-strand SMF
GLC-FE-100BX-D
100BASE-BX10-D SFP module for 100-MB ports, 1550 nm TX/1310 nm RX wavelength, 10 km over single-strand SMF
CWDM-SFP-1470=
Cisco Coarse-Wavelength Division Multiplexing (CWDM) 1470-nm SFP Gigabit Ethernet and 1G/2G fibre Channel
GLC-LH-SMD*
1000BASE-LX/LH SFP transceiver module for MMF and SMF, 1300-nm wavelength
GLC-ZX-SMD*
1000BASE-ZX SFP transceiver module for SMF, 1550-nm wavelength, dual LC/PC connector
GLC-EX-SMD*
1000BASE-EX SFP transceiver module for SMF, 1310-nm wavelength
*Not supported on the Cisco 892F
Rack Mount Kit for 890
ACS-890-RM-19
Rackmount kit for all 890s, except C891-24X
ACS-2901-RM-19
Rackmount kit for 891-24X
FL-C890-WAASX
WAASx Feature License
Cisco and Partner Services
Services from Cisco and our certified partners can help you reduce the cost and complexity of branch-office deployments. We have the depth and breadth of experience across technologies to architect a blueprint for a branch-office solution to meet your company's needs. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance problems, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, visithttp://www.cisco.com/go/services.
Cisco SMARTnet® technical support for the Cisco 890 Series ISRs is available on a one-time or annual contract basis. Support options range from help-desk assistance to proactive, onsite consultation. All support contracts include:
   Major Cisco IOS Software updates in protocol, security, bandwidth, and feature improvements
   Full access rights to Cisco.com technical libraries for technical assistance, electronic commerce, and product information
   24-hour access to the industry’s largest dedicated technical support staff